Category: STEAM

Designing with Tinkercad Codeblocks

makerlovestoryLeave a comment

Since Tinkercad Codeblocks have shown up in the past year, I’ve been awaiting for the right inspiration to use it in the classroom. Of course while I was blissed out in a yoga class, I saw a ceiling hanging that would make a fun project. My idea was for my 5th grade students to use Codeblocks to create simple shapes that could be strung together to make a fun mobile of sorts. My space has a power grid setup for my drop down power and I could see these bringing my makerspace to life. And it meant using brightly colored acrylic in the Glowforge!

I will be having each 5th grader come up with at least four shapes where they will be required to add areas for the fishing line to connect to the shapes, as well as cutouts to add dimension to the designs. Once they build the shapes, the first step is prototyping with cardboard to make sure the shapes were appropriately built.

I also love this project because the cutting time on the Glowforge doesn’t take very long. I look forward to seeing which colors the students chose!

Cardboard Arcade Games

makerlovestoryLeave a comment
Finished Game!

One of the first Elementary Division projects I worked on was inspired by the moving video, Caine’s Arcade. I also wanted to utilize the Makedo Kits which is a wonderful way to learn to construct cardboard together using age appropriate screws, saws and screwdrivers. I did this project with 2nd graders and it engrossed them so much more than I ever expected.

We first watched Caine’s Arcade to get the 2nd graders inspired and I was blown away by how they already had ideas on what they wanted to make the moment the video was over. I wanted to show them how to use the tools before they started making but sometimes you need to go with the flow! The biggest challenge with this project was figuring out how to store the creations because they were bigger than I anticipated. Other than the Makedo Tools and cardboard, we did use masking and duct tapes for the more complicated connections that needed to be made. If students needed balls for their games, I had them ball up foil together. Going forward I do want to come up with a sustainable focus to this project.

Collaborative 3D Design History Project

makerlovestoryLeave a comment
3D Printed Religious Institutions

Last school year the 6th grade History teacher and I collaborated on a project where students were tasked to choose a classic religious building and then recreate it in Tinkercad. I definitely wasn’t sure what the end products would look like but in the end they blew me away.

As students began the project, I could tell they were all overwhelmed so I had them start on one side of the building and go from there rather then looking as the buildings as a whole. The Round Roof shape as both a positive and negative space was truly an asset as they worked on this project. The Extrusion tool was also a great way to get a specific shape executed. As always, smaller detailed designs didn’t turn out as well since I work with Makerbots. But as you can see, they nailed the project and I look forward to more collaborative projects going forward!

Starter Photoshop Lesson -Mondrian Project

makerlovestoryLeave a comment

My starter project when teaching Photoshop tends to be this Mondrian Project because it teaches students the basic tools while allowing them to be creative. I have them focus on the Brush tool, Paint bucket and Color Picker to keep it simple. The first tool I show them is the SHIFT/Click combo that allows Photoshop to create a straight line. It goes, click on area you want the line to begin and then hit SHIFT and CLICK together where you would like the line to end. This always wows them! I also keep the project so they can only use primary colors with a focus on right angles.

Stop-Motion Animation in the Classroom

makerlovestoryLeave a comment
Starry Night

My first passion in life was experimenting with the moving image. I even majored in film at the University of Michigan to learn as much as possible about the medium. I got my start in the classroom teaching animation and I truly became enraptured with all the different ways to use materials and techniques to make the impossible, possible.

Below are some of my favorite pieces of student work from when I used to teach at the Brooklyn Heights Montessori School where I worked with 4-6 graders as part of the Arts Selective Program.

Looking

I always ask students to think of conflict as they construct their narratives o help guide them in the process. Experimenting with materials is also key, which is what I love so much about the Starry Night piece. The entire process was filled with trial error and her hard work really paid off.

Having tripods is key to completing strong stop-motion projects! I also find the iPad app iStopmotion is a great resource due to the onion skilling option. This really helps younger students visualize the stop-motion process. I have my students move their animations from iStopmotion into iMovie to add sounds effects and titles so they can have more control.

Shoe Love

Kinetic Foundations at Anderson Ranch Arts Center

makerlovestoryLeave a comment

This summer I was lucky to get the chance to take a workshop at Anderson Ranch Arts Center in Snowmass, CO. This arts retreat in the Rocky Mountains was a wonderful way to focus on making new connections with creating mechanisms. It was also thrilling to be back in a studio environment filled with great tools. My love of a band saw has yet to diminish!

Each participant in the workshop was given a Stepper Motor to use as a source of movement. This is such a wonderfully slow moving motor which I think will be a great tool for class projects. I definitely felt outside my comfort zone at the start of this class and I quickly remembered to just experiment. I initially tried to make an inverse parallelogram mechanism but my brain couldn’t handle it so I decided to just play instead. Below is the video from that experiment.

Experiment #1 with a Stepper Motor

Once I gained confidence with that mechanism I decided to move onto playing with gears. A main source throughout my time in this workshop is mechanisms.co as well as http://geargenerator.com. I used Gear Generator to create my gears to then laser cut them. I luckily placed them correctly into the wood and they were able to seamlessly move!

Experiment #2

As the end of the workshop loomed I decided I needed to try again at mastering the Inverse Parallelogram Mechanism. I pretty much nailed it but one of the legs is a little too short and doesn’t move as seamlessly as I would’ve liked. But I did it!

Experiment #3

Pencil Holder Design Challenge

makerlovestoryLeave a comment
Pencil Holder Design Challenge

I’ve been teaching 3D design and modeling for the past 5 years. I’ve changed my curriculum up throughout the years but this project has always been a mainstay. It allows for the perfect amount of creativity and problem solving from students. The variety of ideas I’ve experienced over the years is incredible! Students can express themselves through abstract design, use their imagination to conjure up new animals or even design a battlefield where the cannons hold the pencils. I did this project with 5th grade for the first time this year and their creativity has blown me away.

For this project, students have to design something that can contain at least 1 pencil. It can’t be larger than 5inches by 5 inches. I also restrict students from using copy-written material and using their names. They will complain about this but in the end their projects shine as a result. I always tell students who want to put the name of their favorite sports team on something to show me that sport visually instead. Classic show versus tell mindset.

Wall Marble Runs!

makerlovestoryLeave a comment

The final 1st grade project of the year was building marble runs on the walls of the makerspace. This project is perfect for teaching problem solving because they are continuously needing to iterate and make changes. Each group gravitated towards different materials and foil was the real winner for many of them. Materials like paper towel and toilet paper innards, used ice cream pints were also fun additions. Packing tape worked the best but of course the colored duct tape was the use most. But some of the paint did come off the walls as a result so next time I will be changing it to being all packing take.

Makey Makey Instruments

makerlovestoryLeave a comment

My first big Makey Makey project was to build instruments with my 3rd graders. I first had them build the instrument of their choice. I did get some a keyguitar which was quite exciting. They had to keep in mind to add the conductive components either using copper tape or HVAC aluminum tape which worked better than foil.

Once they completed the instrument, it was time to connect the alligator clips and the Makey Makey. Once Scratch was opened, I showed the students how to make original sounds or use the instrumental choices. Several of the students who were more familiar with Scratch also worked on their avatar to it also responded to the controller inherently on the instrument.

Students loved worked on this project. Some struggled with leaving enough time to program on Scratch because they were swept up in the designing phase.

Light Up Shadow Boxes

makerlovestoryLeave a comment

As my confidence with using the Glowforge laser cutter grew, I desired to create a mixed media project for my 7th graders. The result was a light up shadow box project where students designed the elements on Tinkercad and coding a Neopixel Strip using a Microbit. The goal was for each students shadow box to tell a simple story based on the scene featured. I showed them the work of Hari and Deepti to get them inspired and to start the brainstorming process.

The Tinkercad component taught all of us a lot on how to successfully export a .svg file the Glowforge App would read. The lesson they all learned quickly is that each object needs to be the same height as each other and nothing can have rounded edges.

Each student’s project did a wonderful job being unique and expressive of their personalities. It was also nice to see them carefully work on each aspect of this project. Sometimes I see students rushing through a project and that did not happen with this project.

We used the Neopixel extension through Makecode to program the Microbit component of the project. The code I used specifically is in the image below.